Views: 1 Author: Site Editor Publish Time: 2022-01-15 Origin: Site
Computerized flat knitting machine needs regular maintenance to keep the machine in good working condition and prolong its service life. The daily cleaning is mainly to clean and refuel it, and the cleaning can generally be from top to bottom, from the inside to the outside. During routine maintenance, the machine should be in a shutdown state and a power-off state, screws should be tightened, dismantled parts should be reset, and lubricating oil and grease should be added.
When maintaining the Computerized flat knitting machine, some tools are generally used, including but not limited to: industrial vacuum cleaners, special press knives, Allen wrenches, brushes, woven cotton cloth and needle-nose pliers, etc. These tools are helpful for maintenance development of work.
Handpiece: Use a vacuum cleaner to clean the probe and cotton wool, and wipe clean the front and rear covers and flyovers of the handpiece.
Yarn feeder and side tension device: It is required to be wiped clean and free from dust and oil.
Yarn clamping system: use a vacuum cleaner for cleaning, and the manual interface after turning on the machine needs to be further cleaned.
Body oil filling system: Check whether the oil in the oil pump is always in supply state, if the oil is insufficient, it should be added.
Knitting system: Use a vacuum cleaner to clean the color-changing machine base and switching electromagnet. The color-changing block should be lubricated with the special oil of Computerized flat knitting machine, and no one should be missed. The head guide rail is first cleaned with cotton cloth to remove grease and yarn debris, and then inject lubricating oil through the head brush, paying attention to the appropriate amount.