Views: 3 Author: Site Editor Publish Time: 2022-03-11 Origin: Site
There may be problems with brushes and needles during the use of the Computerized flat knitting machine. For these two failures, let's look at the specific solutions.
Computerized flat knitting machine ——Needle: Computerized flat knitting machine selects needles by needles. The alignment of the needles is critical, which will affect the operation of the machine. Generally, high needle stitches do not need to be stitched, and low stitch stitches need to be stitched. For example, when knitting one plus one sesame pull frame collar, needles are selected by high and low needle butts. If the needle butts are not arranged properly, there will be missing stitches. So pay attention to the arrangement of needle butts.
Computerized flat knitting machine ——Brush, the problem with the brush is a very critical point in the missing needle. The following aspects generally cause the problem with the brush; the brush installation is not sound, the front and rear are not correct, the brush is installed backward, and the needle does not cross the angle. , If the device is too high pressure, the rebound of the needle tongue cannot be prevented, and the needle tongue cannot be opened by brushing. If used for a long time, it will cause severe shedding orbiting of hair, and the quality of the brush will be a problem.
The brush device is not suitable, and the front and rear are not aligned. The front and rear of the brush must be aligned because when the machine head pulls the triangular motion to go back and forth, the knitting needle also moves, and the needles on both sides are carried out simultaneously. Press the needle tongue so that the ferrule can be removed smoothly, so there can be no front and rear errors. If it is incorrect, some needle tongues will not be pressed down, resulting in missing needles. To solve this problem, it is necessary to adjust the brush. The brush is installed backward, and the needle does not cross the angle. This problem is the same as the above, so the lower brush should be adjusted.