Dong Guan Qianlima knitting Machine Co, LTD
You are here: Home » News » Industry News » What is the transfer principle of the automatic knitting machine?

What is the transfer principle of the automatic knitting machine?

Views: 6     Author: Site Editor     Publish Time: 2022-04-29      Origin: Site

Computer programs generally control automatic knitting machines with transfer functions, mainly using cotton, linen, silk, wool, and polyester and blended as raw materials to automatically knit sweaters and clothing accessories.

The automatic knitting machine manufacturer introduces the Computerized flat knitting machine's needle bed needle grooves are:

Generally built-in upper knitting needles.

Lower stitches with spring sheets.

The butts of the upper knitting needles.

Lower stitches are divided into high and low heels.

The knitting triangle part is divided into the knitting and flip pin areas. The program controls the active cam in the knitting area, which automatically realizes the functions of knitting, tucking, and non-knitting of high and low heel knitting needles. The needle turning area is generally by changing the needle trajectory of the knitting needle to realize the function of turning the front plate coil over the backplate or the backplate coil over the front plate, so this process does not need a needle selector, but through the electromagnetic. The iron is used to control the action of the movable triangle. The working state of the movable triangle is mainly determined by the position of the lever behind the bottom plate of the triangle.

automatic knitting machine

The middle part of the lever can be fixed on the triangular seat through the lever shaft and can also be rotated around the lever shaft. A cover plate and a guide shaft are fixed on one plane of the active triangle, a lever pin is fixed on the guide shaft, and the spring is sleeved on the guide shaft and placed between the cover plate and the triangle seat. When assembling, ensure that the guide shaft can be in the triangle seat. Flexible up and down movement in the guide sliding hole. Under the action of spring force, the movable triangle is always in the lowest working position.

One end of the lever is in contact with the lever pin, and the other end opposite the two electromagnet cores. The height of the electromagnet is adjusted through the hole position of the electromagnet seat. The position of the rod is different so that the active triangle can be in a high working state or out of a working state. In addition, when the knitting needle is working in the knitting area, the active triangle of the turning needle area is out of the working state.

Quick Link

Contact us

  No. 8, Zhushan road, Dalang town,Dongguan city, Guangdong province, China
  +86769-83481995    +8613712159498 (Jenny Hu)
Copyright © 2001-2021 Dong Guan Qianlima knitting Machine Co, LTD. All rights reserved.Technical Support:Molan Network